Home / Tag Archives: Stainless steel tubes

Tag Archives: Stainless steel tubes

Feed Subscription

The difference between the diameter and the outer diameter of stainless steel tubes

The difference between the diameter and the outer diameter of stainless steel tubes

Generally, the diameter of stainless steel tubes is classified into outer diameter, inner diameter and nominal diameter. The seamless steel pipe diameter using the letter D to that in diameter attached to the size and thickness, such as diameter is ...

Read More »

Stainless Steel Tubes and Copper Tubes in Heat Exchanger By yaang.com

Stainless Steel Tubes and Copper Tubes in Heat Exchanger By yaang.com

The high thermal conductivity of copper can not compensate poor thermal conductivity of  organic solid black particles resulting in decrease of heat transfer. Table 1 demonstrates the effect of fouling on thermal resistance of copper and stainless steel tubes with wall thickness ...

Read More »

Selection Stainless Steel from Corrosion Physical Mechanicalg By yaang.com

Stainless steel is defined as iron alloys with a minimum of 10.5% chromium. Other alloying elements are added to enhance their structure and properties, but fundamentally, stainless steel tubes are considered for selection as steels with corrosion resistant properties. In economic terms they can ...

Read More »

Cleaning of Stainless Steel Tubes By yaang.com

Cleaning of Stainless Steel Tubes By yaang.com

The final operation of stainless steel tubes fter fabrication or heat treatment is cleaning to remove surface contamination and restore corrosion resistance of the exposed surfaces. Degreasing to remove cutting oils, grease, crayon markings, fingerprints, dirt, grime and other organic residues is the first step.  Degreasing: ...

Read More »

Properties at Cryogenic Temperatures of Stainless Steel Tubes By yaang.com

Properties at Cryogenic Temperatures of Stainless Steel Tubes By yaang.com

The austenitic stainless steel tubes remain tough and ductile to very low temperatures. Metals such as iron and constructional steel undergo a marked decrease in ductility at lower temperature. Common Cryogenic Temperatures: Environment Degrees C Degrees F Boiling Helium – 268.6 – 454 Boiling Hydrogen ...

Read More »

Corrosion Resistance of Stainless Steel Tubes By yaang.com

Corrosion Resistance of Stainless Steel Tubes By yaang.com

Carbon steel suffer from ‘general’ corrosion, where large areas of the surface are affected. Stainless steel tubes in the passive state are normally protected against this form of attack, however, localised forms of attack can occur and result in corrosionproblems. The assessment ...

Read More »

Intergranular Corrosion of Stainless Steel Tubes By yaang.com

Intergranular Corrosion of Stainless Steel Tubes By yaang.com

When austenitic stainless steel tubes are heated or cooled through the temperature range 425-900C (800-1650F), chromium tends to combine with carbon to form chromium carbides. The carbides precipitate preferen- tially at grain boundaries depleting chromium from the adjacent areas. This reduces the corrosion resistance of the ...

Read More »

Preparing Metallographic Stainless Steel Specimens By yaang.com

Preparing Metallographic Stainless Steel Specimens By yaang.com

The surface of a metallographic stainless steel tubes are prepared by polishing, grinding,and etching. After preparation, it is often analyzed using optical or electron microscopy. Using only metallographic techniques, a skilled technician can identify stainless steel material properties. Mechanical preparation is the most ...

Read More »

ASTM A789 Seamless Welded Stainless Steel Tube By yaang.com

ASTM A789 Seamless Welded Stainless Steel Tube By yaang.com

ASTM A789 covers standard requirements for grades of nominal wall thickness, stainless steel tubes for services requiring general corrosion resistance, with particular emphasis on resistance to stress corrosion cracking. These steels are susceptible to embrittlement if used for prolonged periods at ...

Read More »

Heat Resisting Seamless Stainless Steel Tubes By yaang.com

Heat Resisting Seamless Stainless Steel Tubes By yaang.com

These stainless steel have the good heat-resisting performance, is suitable in the steam environment or 550℃ and the above temperature. 310S Stainless steel is a combination of good strength and corrosion resistance in temperature up to 2100oF (1149℃). Due to its ...

Read More »
Scroll To Top