Home / Tag Archives: slip-on flange

Tag Archives: slip-on flange

Feed Subscription

The types of flanges and using range

1, The types of flanges according to the national norm: integral flange, threaded flange, weld neck flange, with flat welding neck flange, Socket Weld neck flange, butt welding band neck loose flange, plate, Slip on flange, butt welding plate loose ...

Read More »

Stainless steel slip-on flange for tapping process matters needing attention

Tapping the stainless steel slip-on flange, tapping oil selection is also very important. In order to prolong the service life of the screw tap, the progress of thread machining quality, should pay attention to the following points. Using special stainless ...

Read More »

Production technology of stainless steel slip on flange By yaang.com

Production technology of stainless steel slip on flange By yaang.com

Stainless steel slip on flange drawing convenience, simple manufacture, low cost, widely used; but less rigid. Therefore, it cannot be used for supply and demand, flammable, explosive and high vacuum degree requirements of chemical process piping system and height, is ...

Read More »

About Plate Flange By yaang.com

About Plate Flange By yaang.com

Specification of Plate Flange, Slip On Plate Flange Plate flange [Slip on plate flange] is different with slip on flange without neck for contact with fitting, it usually include GB flange and DIN flange, In ANSI, ASME flange system, which ...

Read More »

About Slip On Flange By yaang.com

About Slip On Flange By yaang.com

Description of Slip on flange Slip On Flange manufacturer antong supplies Slip on flange, SO Flanges, Slip On Flanges in forged steel, Stainless Steel, alloy steel, etc. Specification of Slip on flange Slip on flanges are slipped over the pipe and welded (usually ...

Read More »

Slip On Flanges (SO Flanges) By yaang.com

Slip On Flanges (SO Flanges) By yaang.com

Slip on flanges are slipped over the stainless steel pipes and welded (usually both inside and outside) to provide strength and prevent leakage. Slip on Flanges are at the low cost end of the scale, and do not require high accuracy ...

Read More »

Reducing Flanges

Reducing Flanges

Designed for use in changing diameters in a piping system. A reducing flange consists of a flange with one specified diameter having a bore of a different and smaller, diameter. Reducing Flanges Except for the bore and hub dimensions, the ...

Read More »

Stainless Steel Flanges

Stainless Steel Flanges

We Offer Stainless Steel Parts Stainless Steel machined parts turned Parts Cast Parts Stainless Steel Forged Parts Stainless Steel Fittings SS Stainless Steel Fitting Stainless Steel Fittings Stainless Steel Components facility up to 40 kg’s in weight and Stainless Steel ...

Read More »

Types of Flanges

Types of Flanges

Flanges are used to connect together pipes or to connect a pipe to a choke, tee, valve or other equipment. There are many different flange standards to be found worldwide. Pipe flangea are method of connecting pipes, valves, pumps and other ...

Read More »

SORF Flange

SORF Flange

Slip-on (SO) Flanges are preferred by some contractors, over the Weld-neck, because of the lower initial cost. However, this may be offset by the added cost of the two fillet welds required for proper installation. The strength of the slip-on ...

Read More »
Scroll To Top