Home / Steel Pipe / Seamless Tube / Steel Tubes for Mechanical and Automobile
Stainless Steel Flanges

Steel Tubes for Mechanical and Automobile

Seamless Steel Tubes for Mechanical and Automobile usage for Backbone of Automobile and rear axle tube, manufacturing and processing of precision equipments, instruments and apparatus.

Tubes for Mechanical and Automobile, seamless tube, Seamless pipes, Cold draw, Hot rolled, DIN2391, ASTM A519, ASTM A513

Yaang Steel supply a 1/2 million foot inventory of carbon steel pressure tubing including boiler tubes, condenser tubes and heat exchanger tubes all made in the China.
Our carbon steel pressure tubing inventory is manufactured in accordance with ASME SA-178 A and/or ASME SA-214 in diameters of 3/4inch through 4inch.
Application:
Backbone of Automobile and rear axle tube
Manufacturing and processing of precision equipments, instruments and apparatus
Production Standard, Grade, Steel No:
DIN2391 St35St45St52
ASTM A519 1010, 1020, 1025, 1035, 1045
ASTM A513 1010, 1020, 1025, 1035, 1040
BS6323 CFSCFS3ACFS4-11
EN10305-1 E215E235E355
JIS G 3441 SCM415TK SCM 430 TKSCM 440 TK
GB/T3639 10, 20, 35, 45
Delivery Condition: GBK, BKS, BK, BKW, NBK
Inspection and Test:
Chemical Composition, Mechanical Properties, Visual and Dimension Test, NDT, Grain Size Test
Surface treatment:
Oil-dip, Varnish, Shot Blasting

Grade and Chemical Composition (%)
Grade C Mn P≤ S≤ Si Cr Mo
1010 0.08-0.13 0.30-0.60 0.04 0.05
1020 0.18-0.23 0.30-0.60 0.04 0.05
1045 0.43-0.50 0.60-0.90 0.04 0.05
4130 0.28-0.33 0.40-0.60 0.04 0.05 0.15-0.35 0.80-1.10 0.15-0.25
4140 0.38-0.43 0.75-1.00 0.04 0.05 0.15-0.35 0.80-1.10 0.15-0.25
Typical Mechanical Properties
Grade Condition Tensile strength Yield stength Elongation
Mpa(min) Mpa(min) %(min)
1020 CW 414 483 5
SR 345 448 10
A 193 331 30
N 234 379 22
1025 CW 448 517 5
SR 379 483 8
A 207 365 25
N 248 379 22
4130 SR 586 724 10
A 379 517 30
N 414 621 20
4140 SR 689 855 10
A 414 552 25
N 621 855 20
Size Range

Tubular products seamless mechanical tubing is furnished in both cold-drawn and hot finished form in a wide range of sizes, from 1.375″ to 7.750″ OD and from 0.188″ to 1.625″ wall thickness.

Minimum Quantities

Hot-finished carbon and alloy—10,000 pounds, or 4,536 kilograms minimum.
Cold-drawn carbon and alloy—5,000 pounds minimum or 125 feet minimum, 2,268 kilograms minimum or 38.1 meters minimum, whichever is greater.
Quantity variation—standard ±10% of the ordered weight, or ±25 feet or 7.61 meters, whichever is greater.

Special Configurations

Tubular Products special seamless tubing configurations start with the highest quality steels. Grade, chemical analysis and surface condition are carefully considered, and production processes are tailored to achieve the best tubing for the end use.
The configurations are formed from round tube by cold drawing. The tube is drawn over a shaped mandrel or through a shaped die, or both. Improved tolerances, finishes and mechanical properties result.

About NCTV

www.yaang.com provide a wide range of steel products as Steel pipe, Steel pipes and seamless pipes, Alloy pipes, Pipe fittings, Composite steel pipe used in the industry, construction etc.

Leave a Reply

Your email address will not be published. Required fields are marked *

*

Scroll To Top