Blind pipe flanges are pipe flanges used to seal the end of a piping system or pressure vessel openings to prevent flow.
Blind pipe flanges are commonly used for pressure testing the flow of liquid or gas through a pipe or vessel. Blind pipe flanges also allow easy access to the pipe in the event that work must be done inside the line. Slip on Pipe flanges with a hub have published specifications that range from 1/2″ thru 96″. Coastal Flange provides Blind pipe flanges in all material grades, specifications and sizes.
Blind pipe flanges are typically provided with a raised face, flat face, or RTJ facing. When a raised face is necessary for blind pipe flanges, the standard height is 1/16″ for blind pipe flanges under 400#. For blind pipe flanges of 400# and up, the standard blind pipe flange raised face height is 1/4″.
Features of blind flanges:
Some important features of blind flanges are as follows:
- Blind flanges are sometimes supplied with NPT fittings which allow pressure test connections to be fitted.
- They are used to blank off the ends of pipe.
- They are also used to blank off the ends of valves and pressure vessel opening.
- Considering factors like internal pressure and bolt loading, blind flanges, especially in the larger sizes, are the most highly stressed of all types of flanges.
- Since the maximum stresses in a blind flange are bending stresses at the center, they can safely be allowed to be higher than in other types of flanges.
- Blind flanges are made to fit standard pipes in all sizes.